Friday, April 7, 2017

Radiopaedia

A screenshot of Radiopaedia.org.
A screenshot of Radiopaedia.org.
Readers of Intermediate Physics for Medicine and Biology learn topics in medical physics from a physics point-of-view. Often, however, the discussion in IPMB doesn’t emphasize clinical applications. Where can you get more clinical information? Radiopaedia! Radiopaedia.org is a free online website with a large collection of radiology cases and reference articles.

To see what this site is like, I typed some terms into its search box. When I searched for MRI, I found articles about topics that Russ Hobbie and I present in Chapter 18 of IPMB, such as MRI pulse sequences and MRI artifacts, but also a wealth of clinical topics such as protocols for MRI brain screens, stroke, demyelination, and rectal cancer. The site also contains many case studies of specific patients. And it doesn’t cost a thing.

Radiopaedia has much information about nuclear medicine (Chapter 17 in IPMB). I typed “99mTc” into the search box and found articles describing a variety of radiopharmaceuticals based on the technetium-99m radioisotope. Also, the site has much information about positron emission tomography (PET) and single photon emission computed tomography (SPECT).

Radiopaedia covers the interaction of x-rays with tissue (Chapter 15 in IPMB) in a variety of articles about different mechanisms such as the photoelectric effect, Compton scattering, and pair-production. Many features of x-ray technology are also discussed (Chapter 16 in IPMB), like x-ray tubes, filters, collimators, grids, and intensifying screens. But also describes x-ray images of specific body parts, such as the abdomen, pelvis, ankle, and shoulder. And all this information is available gratis.

The web site discusses computed tomography qualitatively, but not quantitatively, and lacks much of the mathematics presented in Chapter 12 of IPMB. It contains many medical images, but almost no other figures. For example, the discussion of four generations of CT scanners would benefit from a figure, like Fig. 16.25 in IPMB.

Ultrasound is covered in Chapter 13 of IPMB, and also in Radiopaedia. Topics include transducers, pulse-echo imaging, elastography, and Doppler imaging. Best of all, this valuable information is on the house.

One of the best parts of Radiopaedia is the quiz mode for patient cases. You get to be the doctor, analyzing different medical problems. These cases are too difficult for me to diagnose, but perhaps you can. I find Radiopaedia to be a helpful, no-cost supplement to our book: IPMB supplies the math and physics, while Radiopaedia analyzes the clinical applications.

Did I mention that Radiopaedia is free?

Enjoy.

Friday, March 31, 2017

Top Ten Illustrations in Intermediate Physics for Medicine and Biology

I always love top ten lists, so I prepared a list of my top ten illustrations in Intermediate Physics for Medicine and Biology. These are a subjective, personal selections; you may prefer others. I excluded any figure that was reproduced in IPMB from another publication, so many of my favorite images are not listed. Except as noted, Russ Hobbie created these figures, and they appeared first in earlier editions of IPMB on which he was sole author.

A figure from Intermediate Physics for Medicine and Biology showing how radiation interacts with tissue using the program MacDose.

10. Figure 15.30. Although this figure is not the most attractive of those in the top ten, I selected it because it is based on Russ’s simulation program MacDose. Be sure to watch Russ’s video based on MacDose; it is a great learning experience.

A figure from Intermediate Physics for Medicine and Biology showing the extracellular potential produced by a nerve axon.
9. Figure 7.13. I helped create this figure when I was in graduate school. Russ asked my PhD advisor John Wikswo if he could supply two figures showing the extracellular potential (Fig. 7.13) and magnetic field (Fig. 8.14) produced by an axon. Wikswo asked me to do the calculations, and he had an illustrator in the lab produce the final drawing.

A figure from Intermediate Physics for Medicine and Biology showing a bone scan obtained using a scintillation camera.
8. Figure 17.19.  This scintillation camera bone scan of a 7-year-old boy is spooky, with ghostly radioactive hot spots. It is one of the many medical images Russ obtained from colleagues at the University of Minnesota. In this case, Bruce Hallelquist provided the photo. IPMB is much the richer for all the images provided by Russ’s friends.

A figure from Intermediate Physics for Medicine and Biology showing how radiation and electrons interact in biological tissue.

7. Figure 15.15. This figures illustrates the transfer of energy between photons and electrons. I like how it summarizes much of the chapter about the Interaction of Photons and Charged Particles with Matter in a single drawing.

A figure from Intermediate Physics for Medicine and Biology showing how blackbody radiatio depends on both frequency and wavelength.
6. Figure 14.24. New in the 4th edition of IPMB, this figure illustrates the blackbody radiation spectrum. It clarifies why the spectrum appears different when plotted versus frequency compared to when plotted versus wavelength.

A figure from Intermediate Physics for Medicine and Biology showing how tomography works.
5. Figure 12.12. This illustration defining the projection is critical to understanding tomography. Russ and I liked it so much that we considered using it on the cover of the 4th edition of IPMB, until Springer decided to go with their own cover design that didn’t include a figure from the book.

A figure from Intermediate Physics for Medicine and Biology showing a digital subtraction angiography.

4. Figure 16.23. This image, obtained using digital subtraction angiography, is another medical illustration provided by one of Russ’s colleagues at the University of Minnesota (Richard Geise). I chose it because it is stunningly beautiful.

A figure from Intermediate Physics for Medicine and Biology showing an image obtained using optical coherance tomography.

3. Figure 14.16. Color! This optical coherence tomogram of the retina was supplied by Kirk Morgan. A few figures in IPMB go beyond black and white, but this is the only one in glorious full color.

A figure from Intermediate Physics for Medicine and Biology showing an image of the brain and its Fourier transform.
2. Figure 12.6. I like this magnetic resonance image of the brain because it helps build insight into how an image and its Fourier transform are related. It is the first of a series of six images in Chapter 12 prepared by Tuong Huu Le (University of Minnesota, also thanks to Xiaoping Hu) that, by themselves, provide a short course in image processing.

And the winner is….

A figure from Intermediate Physics for Medicine and Biology showing the behavior of the electrocardiogram.
1. Figure 7.16. This picture of the direction of the dipole during the cardiac cycle nicely summarizes the electrocardiogram. My career has focused on the bioelectric behavior of the heart, so it is fitting that my top pick builds on that theme. The reason I chose it, however, is because it was on the cover of the first edition of IPMB, which I used in my first medical physics course taught by John Wikswo at Vanderbilt University.

A photograph of the cover of the first edition of Intermediate Physics for Medicine and Biology.

Friday, March 24, 2017

Enhancement of Human Color Vision by Breaking the Binocular Redundancy

Russ Hobbie and I added a discussion of color vision to the 5th edition of Intermediate Physics for Medicine and Biology.
The eye can detect color because there are three types of cones in the retina, each of which responds to a different wavelength of light (trichromate vision): red, green, and blue, the primary colors. However, the response curve for each type of cone is broad, and there is overlap between them (particularly the green and red cones). The eye responds to yellow light by activating both the red and green cones. Exactly the same response occurs if the eye sees a mixture of red and green light. Thus, we can say that red plus green equals yellow. Similarly, the color cyan corresponds to activation of both the green and blue cones, caused either by a monochromatic beam of cyan light or a mixture of green and blue light. The eye perceives the color magenta when the red and blue cones are activated but the green is not. Interestingly, no single wavelength of light can do this, so there is no such thing as a monochromatic beam of magenta light; it can only be produced my mixing red and blue. Mixing all three colors, red and green and blue, gives white light.
I know that some animals have dichromate vision (only two color receptors), as do some color blind people. Also, a few animals have tetrachromate vision (four color receptors). But I never imagined that I could have enhanced color vision just by wearing a pair of fancy glasses. Could I become a tetrachromat?

Yes! A preprint appeared recently in the biological physics arXiv by Mikhail Kats and his colleagues at the University of Wisconsin about “Enhancement of Human Color Vision by Breaking the Binocular Redundancy” (arXiv:1703.04392). Graduate student and National Science Foundation Graduate Research Fellow Brad Gundlach is the lead author of this fascinating paper. The abstract is given below.
To see color, the human visual system combines the responses of three types of cone cells in the retina—a process that discards a significant amount of spectral information. We present an approach that can enhance human color vision by breaking the inherent redundancy in binocular vision, providing different spectral content to each eye. Using a psychophysical color model and thin-film optimization, we designed a wearable passive multispectral device that uses two distinct transmission filters, one for each eye, to enhance the user’s ability to perceive spectral information. We fabricated and tested a design that “splits” the response of the short-wavelength cone of individuals with typical trichromatic vision, effectively simulating the presence of four distinct cone types between the two eyes (“tetrachromacy”). Users of this device were able to differentiate metamers (distinct spectra that resolve to the same perceived color in typical observers) without apparent adverse effects to vision. The increase in the number of effective cones from the typical three reduces the number of possible metamers that can be encountered, enhancing the ability to discriminate objects based on their emission, reflection, or transmission spectra. This technique represents a significant enhancement of the spectral perception of typical humans, and may have applications ranging from camouflage detection and anti-counterfeiting to art and data visualization.
I’d love to try out a pair of these glasses! I wonder whether they provide merely a subtle change in vision or offer an entirely new visual experience? Also, what would it be like to have each eye receiving different color information? Does the brain need to be trained to handle the additional information, or does it adapt easily? If the enhancement of vision is dramatic, I could easily see these glasses becoming the hot new gadget people clamor for this Christmas. And it all comes from applying physics to medicine and biology.

Friday, March 17, 2017

Five Popular Misconceptions about Osmosis

In Chapter 5 of Intermediate Physics for Medicine and Biology, Russ Hobbie and I discuss osmotic pressure.
5.2 Osmotic Pressure in an Ideal Gas

The selective permeability of a membrane gives rise to some striking effects. The flow of water that occurs because solutes are present that cannot get through the membrane is called osmosis. This phenomenon seems strange when it is first encountered, and explanations are often fraught with misconceptions (Kramer and Myers 2012).
What are these misconceptions that explanations are often fraught with? The reference is to the paper “Five Popular Misconceptions About Osmosis” (American Journal of Physics, Volume 80, Pages 694–699, 2012). The paper raises five questions.
  1. Is osmosis limited to mixtures in the liquid state? 
  2. Does osmosis require an attractive interaction between solute and solvent? 
  3. Can osmosis drive solvent from a compartment of lower to higher solvent concentration? 
  4. Can the osmotic pressure be interpreted as the partial pressure of the solute? 
  5. What exerts the force that drives solvent across the semipermeable membrane, overcoming both viscous resistance and an opposing hydrostatic pressure gradient?
Later in the paper, the authors answer these questions.
  1. The phenomenology of osmosis is the same for gases, liquids, and supercritical fluids. The misconception is that osmosis is limited to liquids. 
  2. Osmosis does not depend on an attractive force between solute and solvent. The misconception is that osmosis requires an attractive force. 
  3. Osmosis can drive solvent from a lower to a higher solvent concentration compartment. The misconception is that osmosis always happens down a concentration gradient. 
  4. The osmotic pressure cannot be interpreted as the partial pressure of the solute. The misconception is that it can. 
  5. The semipermeable membrane exerts the force that drives solvent flow. The misconception is that no force is required to explain the flow.
So, how did Russ and I do?
  1. We certainly get the first question correct, because our initial explanation is for an ideal gas. 
  2. I think we get the second one right too, but it is not as clear, because we restrict our discussion to ideal solutions in which no heat is evolved or absorbed. 
  3. We cast our discussion in terms of the chemical potential, and then relate the chemical potential to the hydrostatic pressure and the solute concentration. I don’t think we ever address the issue of solvent concentration. I’ll say we are silent on this one. 
  4. We say “Except in an ideal gas, it [the chemical potential] is not the same as the partial pressure (a concept that is not normally used in a liquid).” So we get this one right, and I’m glad we put the not in italics. 
  5. In Section 5.9.6 we have a nice discussion about the forces acting on the membrane. But we never really say what force explains the solvent flow. Again, I’ll say we are silent on this one.
Kramer and Myers have an illuminating discussion about the force causing the solvent to cross the membrane (I’ve removed all their references; you can find them in the original paper).
Consider an idealized semipermeable membrane as a force field that repels solute but has no effect on the solvent. The Brownian motion of the solute molecules bring them into occasional contact with this field, at which time they receive some momentum directed away from the membrane. Viscous interactions between solute and solvent then rapidly distribute this momentum to the solvent molecules in the neighborhood of the membrane. In this way, the membrane exerts a repulsive force on the solution as a whole. Since additional pure solvent can freely cross our idealized membrane, it flows into the solution compartment, gradually increasing the hydrostatic pressure in the solution. Thus, a pressure gradient builds up across the thickness of the membrane. This pressure gradient exerts a second force on the solution, capable of counteracting the membrane force. Quantitative treatments show that the pressure difference required to stop solvent flow into a dilute solution is exactly Π = kBTcB. Nelson has aptly called the mechanism by which the membrane drives fluid flow the rectification of Brownian motion.
Overall I would say Russ and I do okay. We don’t propagate any of the five misconceptions. We answer three of their questions correctly and are silent on two others. Most of the discussion about osmosis goes back to the 3rd or earlier editions of IPMB, so Russ is the one who got it right. At least I didn’t screw it up.

Friday, March 10, 2017

My Honors College Class: The Making of the Atomic Bomb

The Making of the Atomic Bomb, by Richard Rhodes, superimposed on Intermediate Physics for Medicine and Biology.
The Making of the Atomic Bomb,
by Richard Rhodes.
This semester I am teaching a class in Oakland University’s Honors College called “The Making of the Atomic Bomb,” based on Richard Rhodes’s book by the same name. The class is a mixture of nuclear physics, a history of the Manhattan Project, and a discussion about World War II (today we discuss Pearl Harbor). I became interested in this topic from the writings of Cameron Reed of Alma College here in Michigan.

The Honors College students are outstanding, but they are from disciplines throughout the university and do not necessarily have strong math and science backgrounds. Therefore the mathematics in this class is minimal, but nevertheless we do a two or three quantitative examples. For instance, Chadwick’s discovery of the neutron in 1932 was based on conclusions drawn from collisions of particles, and relies primarily on conservation of energy and momentum. When we analyze Chadwick’s experiment in my Honors College class, we consider the head-on collision of two particles of mass M1 and M2. Before the collision, the incoming particle M1 has kinetic energy T and the target particle M2 is at rest. After the collision, M1 has kinetic energy T1 and M2 has kinetic energy T2.

Intermediate Physics for Medicine and Biology examines an identical situation in Section 15.11 on Charged-Particle Stopping Power.
The maximum possible energy transfer Wmax can be calculated using conservation of energy and momentum. For a collision of a projectile of mass M1 and kinetic energy T with a target particle of mass M2 which is initially at rest, a nonrelativistic calculation gives
One important skill I teach my Honors College students is how to extract a physical story from a mathematical expression. One way to begin is to introduce some dimensionless parameters. Let t be the ratio of kinetic energy picked up by M2 after the collision to the incoming kinetic energy T, so t = T2/T or, using the notation in IPMB, t = Wmax/T (the subscript “max” arises because this maximum value of T2 corresponds to a head-on collision; a glancing blow will result in a smaller T2). Also, let m be the ratio of M1 to M2, so m = M1/M2. A little algebra results in the simpler-looking equation
The goal is to unmask the physical behavior hidden in this equation. The best way to proceed is to examine limiting cases. There are three that are of particular interest.

m much less than 1. When m is small (think of a fast-moving proton colliding with a stationary lead nucleus) the denominator is approximately one, so t = 4m. Because m is small, so is t. This means the proton merely bounces back elastically as if striking a brick wall. Little energy is transferred to the lead nucleus.
An illustration showing how a light mass behaves when it hits a stationary heavy mass.
 m much greater than 1. When m is large (think of a fast-moving lead nucleus smashing into a stationary proton) the denominator is approximately m2, so t = 4/m. Because m is large, t is small. This means the lead continues on as if the proton were not even there, with little loss of energy. The proton flies off at a high speed, but because of its small mass it carries off negligible energy.
An illustration showing how a heavy mass behaves when it hits a stationary light mass.
m equal to 1. When m is one (think of a neutron colliding with a proton, which was the situation examined by Chadwick), the denominator becomes 4, and t = 1. All of the energy of the neutron is transferred to the proton. The neutron stops and the proton flies off at the same speed the neutron flew in.
An illustration showing how a mass behaves when it hits a stationary mass.
A mantra I emphasize to my students is that equations are not just things you put numbers into to get other numbers. Equations tell a physical story. Being able to extract this story from an equation is one of the most important abilities a student must learn. Never pass up a chance to reinforce this skill.

Friday, March 3, 2017

Glucose, Mannitol, Sucrose, and Raffinose

The structure of glucose.
The structure of glucose.
You would think by now I would know everything in Introductory Physics for Medicine and Biology; after all, I’m one of the authors. So when thumbing through the book the other day (doesn’t everyone thumb through IPMB when they have a spare moment?) I came across Figure 4.11, showing a log-log plot of the diffusion constant as a function of molecular radius. Four data points stand out—glucose, mannitol, sucrose, and raffinose—because they are plotted as open rather than solid circles. This figure was drawn originally by Russ Hobbie and has appeared in every edition of IPMB. I got to wondering “why did Russ choose to plot those four molecules out of the thousands available?” And then, more specifically, I found myself asking “just what is raffinose anyways?”

Figure 4.11 of Intermediate Physics for Medicine and Biology, showing the diffusion constant of a molecule as a function of the size of the molecule.

To figure all this out, I grabbed the textbook I read in graduate school while auditing the biochemistry class taken by Vanderbilt medical students (Biochemistry, by the late Geoffrey Zubay). These molecules are carbohydrates or, more simply, sugars. Glucose is the canonical example; this six-carbon molecule C6H12O6 is “the single most important substrate for energy metabolism” and in humans it is “the single most important sugar in the blood”. It usually exists in a ring conformation. It is a monosaccharide because it consists of a single ring. Other monosaccharides are fructose and galactose, which all have the same formula, C6H12O6, but the arrangement of the atoms is slightly different.

Mannitol differs from glucose by having an extra two hydrogen atoms: C6H14O6. Technically it’s a sugar alcohol rather than a sugar. You’d think it would act similarly to glucose, but it doesn’t. Mannitol is relatively inert in humans. It doesn’t cross the blood-brain barrier (I discussed the implications of this previously in this blog) and it is not reabsorbed by the kidney like glucose is so it acts as an osmotic diuretic. In Fig. 4.11, the mannitol and glucose data almost overlap, and it is hard to tell which data point is which. According to a paper by Bashkatov et al. (2003), glucose has a larger diffusion coefficient than mannitol, so glucose must be the data point above and to the left, and mannitol below and to the right.

Sucrose is a disaccharide, which means it is two monosaccharides bound together through a “glycosidic linkage”. It’s common table sugar, and consists of a molecule of glucose bound to a molecule of fructose. Russ probably chose to plot sucrose as a typical disaccharide. Two other  disaccharides he could have chosen are lactose (glucose + galactose) and maltose (glucose + glucose).

Raffinose is a trisaccharide, consisting of galactose + glucose + fructose. Therefore, Russ’s choice of plotting glucose, sucrose, and raffinose makes sense: the most important monosaccharide, disaccharide, and trisaccharide. A fun fact about raffinose is that the human digestive tract does not have the enzyme needed to digest it. However, certain gas-producing bacteria in our gut can digest it, resulting in flatulence. You probably won’t be surprised to learn that beans often contain a lot of raffinose.

So, Russ is a clever fellow. He hid a short review of carbohydrate biochemistry in Fig. 4.11. Who knew?

Friday, February 24, 2017

Benefits and Barriers of Accommodating Intraocular Lenses

In Chapter 14 of Intermediate Physics for Medicine and Biology, Russ Hobbie and I discuss vision. In particular, we analyze the refraction of light by the lens of the eye, and examine different disorders such as hyperopia, and myopia. We then write
This ability of the lens to change shape and provide additional converging power is called accommodation…. As we age, the accommodation of the eye decreases... A normal viewing distance of 25 cm or less requires 4 diopters or more of accommodation... This limit is usually reached in the early 40s. To make up for the lack of accommodation, one can place a converging lens in front of the eye when viewing nearby objects (reading glasses).
When a patient has a cataract, their lens becomes cloudy. A common surgical procedure is to remove the opaque lens and replace it with an artificial intraocular lens. A conventional IOL is designed to supply the correct power to provide clear distance vision, but it cannot accommodate. Reading glasses provide one option for close vision, but many patients find them to be an inconvenient nuisance.

Researchers are now racing to create accommodating IOLs. A recent review by Jay Pepose, Joshua Burke, and Mujtaba Qazi discusses the “Benefits and Barriers of Accommodating Intraocular Lenses” (Current Opinion in Ophthalmology, Volume 28, Pages 3–8, 2017).
Presbyopia [the loss of accommodation] and cataract development are changes that ubiquitously affect the aging population. Considerable effort has been made in the development of intraocular lenses (IOLs) that allow correction of presbyopia postoperatively. The purpose of this review is to examine the benefits and barriers of accommodating IOLs, with a focus on emerging technologies.
Apparently the current accommodating intraocular lenses don’t function by changing their focal length, but rather by being pushed forward when the eye muscles responsible for accommodation contract. They only provide about 1 diopter of accommodation, which is not enough to avoid reading glasses. The review concludes
Such limitations [of the presently available accommodating IOLs] may be circumvented in the future by accommodative design strategies that rely more on shape-related changes in the surfaces of the IOLs or in refractive index than by forward translation alone. Fibrosis and contraction of the capsular bag, which can alter the position of the IOL optic or the performance of an accommodating IOL represent other challenges, and at least one accommodating IOL … has been designed for implantation in the ciliary sulcus. Approval of accommodating IOLs capable of delivering three or more diopters of accommodation would allow a full range of intermediate and near vision without the compromise of photic phenomenon or loss of contrast inherent to other optical strategies, and perhaps also allow refractive targeting that could minimize hyperopic surprises by taking advantage of this expanded amplitude of accommodation.
Some “accommodating” IOLs are multifocal, providing two focal lengths and therefore two images simultaneously, one for distance vision and one for reading. The brain then sorts out the mess. Apparently this is not as difficult as is sounds.

I predict that accommodating intraocular lenses will soon become very sophisticated. Cataract surgery is performed on millions of people each year; it is common in the elderly population, which is growing dramatically as baby boomers age; in principle the problem is not complex, you just need to make a lens that can adjust its focal length by about ten percent; compared to other medical devices like pacemakers and defibrillators, accommodating IOLs should be cheap; and new nanotechnologies plus knowledge gained from the miniaturization of other medical devices may pave the way to rapid advances. Accommodating intraocular lenses may soon become an example of how to successfully apply physics to solve a problem in medicine.

Friday, February 17, 2017

Sir Peter Mansfield (1933-2017)

MRI pioneer Peter Mansfield died last week. Russ Hobbie and I mention Mansfield in Chapter 18 of Intermediate Physics for Medicine and Biology
Many more techniques are available for imaging with magnetic resonance than for x-ray computed tomography. They are described by Brown et al. (1994), by Cho et al. (1993), by Vlaardingerbroek and den Boer (2004), and by Liang and Lauterbur (2000). One of these authors, Paul C. Lauterbur, shared with Sir Peter Mansfield the 2003 Nobel Prize in physiology or medicine for the invention of magnetic resonance imaging.
Mansfield made many contributions to the development of MRI, including the invention of echo-planar imaging. Russ and I write
Echo-planar imaging (EPI) eliminates the π pulses [normally used to rotate the spins in the x-y plane to form a spin echo]. It requires a magnet with a very uniform magnetic field, so that T2 [the transverse relaxation time, that is determined in part by dephasing of the spins in the x-y plane] (in the absence of a gradient) is only slightly greater than T2* [the experimentally observed transverse relaxation time]. The gradient fields are larger, and the gradient pulse durations shorter, than in conventional imaging. The goal is to complete all the k-space [all the points kx-ky in the spatial frequency domain] measurements in a time comparable to T2*. In EPI the echoes are not created using π pulses. Instead, they are created by dephasing the spins at different positions along the x axis using a Gx gradient, and then reversing that gradient to rephrase the spins, as shown in Fig. 18.32.
A magnetic resonance imaging pulse sequence for echo planar imaging, from Intermediate Physics for Medicine and Biology.
A MRI pulse sequence for echo planar imaging,
from Intermediate Physics for Medicine and Biology.

Mansfield tells about his first presentation on echo-planar imaging in his autobiography, The Long Road to Stockholm.
It was during the course of 1976 that Raymond Andrew convened a meeting in Nottingham of interested people in imaging…Most attendees brought us up to date with their images and gave us short talks on the goals that they were pursuing. Although my group had made considerable headway in a whole range of topics, I chose to speak about an entirely new imaging method that I had worked out theoretically but for which I had really no experimental results. The technique was called echo planar imaging (EPI), a condensation of planar imaging using spin echoes. I spoke for something like half an hour, talking in great detail, and at the end of the talk the audience seemed to be left in stunned silence. There were no questions, there was no discussion at all, and it was almost as though I had never spoken. In fact I had given a detailed talk about how one could produce very rapid images in a typically one shot process lasting, conservatively, for something like 40 or 50 milliseconds.
You can learn more about Mansfield in obituaries in the New York Times, in The Scientist, and from the BBC. Also, the Nobel Prize website has much information including a biography and his Nobel Prize address. Below, watch and listen to Mansfield talk about MRI.




Friday, February 10, 2017

Good, Fast, Cheap: Pick Any Two

When I worked at the National Institutes of Health, one of my coworkers had a sign in his office that read “Good, Fast, Cheap: Pick Any Two.” A recent video about “Building tomorrow's MRI--faster, smaller, and cheaper” reminded me of that saying. The video is part of a series called Science Happens! by Carl Zimmer.


Russ Hobbie and I describe magnetic resonance imaging in Chapter 18 of Intermediate Physics for Medicine and Biology. However, we don’t discuss the possibilities related to low-field MRI. The Science Happens! website says
Matthew Rosen and his colleagues at the Martinos Center for Biomedical Imaging in Boston want liberate the MRI. They’re hacking a new kind of scanner that’s fast, small, and cheap. Using clever algorithms, they can use a weak magnetic field to get good images of our brains and other organs. Someday, people may not have to go to hospital for an MRI. The scanners may show up in sports arenas, battlefields, and even the backs of ambulances.
A longer, more technical video of Rosen describing his work is given below.


For more details, see Rosen’s open access article “Low-Cost High-Performance MRI” (Scientific Reports, 5:15177, 2015).
Magnetic Resonance Imaging (MRI) is unparalleled in its ability to visualize anatomical structure and function non-invasively with high spatial and temporal resolution. Yet to overcome the low sensitivity inherent in inductive detection of weakly polarized nuclear spins, the vast majority of clinical MRI scanners employ superconducting magnets producing very high magnetic fields. Commonly found at 1.5–3 tesla (T), these powerful magnets are massive and have very strict infrastructure demands that preclude operation in many environments. MRI scanners are costly to purchase, site, and maintain, with the purchase price approaching $1 M per tesla (T) of magnetic field. We present here a remarkably simple, non-cryogenic approach to high-performance human MRI at ultra-low magnetic field, whereby modern under-sampling strategies are combined with fully-refocused dynamic spin control using steady-state free precession techniques. At 6.5 mT (more than 450 times lower than clinical MRI scanners) we demonstrate (2.5 × 3.5 × 8.5) mm3 imaging resolution in the living human brain using a simple, open-geometry electromagnet, with 3D image acquisition over the entire brain in 6 minutes. We contend that these practical ultra-low magnetic field implementations of MRI (less than 10 mT) will complement traditional MRI, providing clinically relevant images and setting new standards for affordable (less than $50,000) and robust portable devices.
$50,000 is expensive by Manu Prakash's standards, but for an MRI device $50k is darn cheap! Recalling my friend’s motto, I think that Rosen has picked Fast and Cheap, but he’s gotten Pretty Good too, which is not a bad trade-off (all of engineering is trade-offs). If you want Super Good, spend the million bucks.

Finally, Rosen isn’t the only one interested in reinventing magnetic resonance imaging. Michael Garwood at Russ’s own University of Minnesota is also working on smaller, lighter, cheaper MRI.

Let the race begin. Humanity will be the winner.

Enjoy!

Friday, February 3, 2017

Alan Perelson wins the 2017 Max Delbruck Prize in Biological Physics

Alan Perelson, of Los Alamos National Laboratory, has been named the winner of the 2017 Max Delbruck Prize in Biological Physics by the American Physical Society. His award was “for profound contributions to theoretical immunology, which bring insight and save lives.”

One skill Russ Hobbie and I try to develop in students using Intermediate Physics for Medicine and Biology is the ability to translate words into mathematics. Below I present a new homework problem based on one of Perelson’s most highly cited papers (Perelson et al., 1996, Science, 271:1582–1586), which provides practice in this important technique. This exercise asks the student to make a mathematical model of the immune system that explains how T-cells—a type of white blood cell—respond to HIV infection.
Section 10.8

Problem 37 1/2. A model of HIV infection includes the concentration of uninfected T-cells, T, the concentration of infected T-cells, T*, and the concentration of virions, V.

(a) Write a pair of coupled differential equations for T* and V based on the following assumptions
  • If no virions are present, the immune system removes infected T-cells with rate δ,
  • If no infected T-cells are present, the immune system removes virions with rate c
  • Infected T-cells are produced at a rate proportional to the product of the concentrations of uninfected T-cells and virions; let the constant of proportionality be k
  • Virions are produced at a rate proportional to the concentration of infected T-cells with a constant of proportionality , where N is the number of virions per infected T-cell. 
(b) In steady state, determine the concentration of uninfected T-cells.
One of Perelson’s coauthors on the 1996 paper was David Ho. Yes, the David Ho who was Time Magazine’s Man of the Year in 1996.

For those who prefer video, watch Perelson discuss immunology for physicists.